LV (PES 200kDa) – Industrial

Industrial Ultrafiltration Spiral-Wound Element:
LV(PES 200kDa)

Synder Filtration’s Ultrafiltration Elements offer an optimal combination of both flux and rejection in a comprehensive range of MWCO’s. Contact us today to learn more about our complete line of membrane products and services.

LV is a newly-developed PES-based ultrafiltration membrane, with a molecular weight cut-off between that of LY and LX. This membrane was developed to further expand Synder’s ultrafiltration line of membranes and offer more choices for molecular weight cut-off to meet the demands of specialty process applications. Along with the other PES-based membranes, LV offers good pH and temperature resistance and is also available in a MAX version which is able to withstand higher pH and temperature limits. LV is also commonly used for corn wet milling processes to reduce operational and discharge costs.

INDUSTRIAL SERIES BENEFITS

Widest range of UF MWCO’s available
Good resistance to pH and temperature
High resistance to fouling
Customizable dimensions for unique housings

COMMON APPLICATIONS

Corn wet milling

Element Specifications

RECOMMENDED OPERATING PARAMETERS

Membrane Type
Proprietary PVDF	Spiral-Wound with netted outerwrap or fiber glass hardshell (FRP)

Pressure	PSI	Bar
Max Inlet Pressure	116	8.0
Min Outlet Pressure	10	0.7
Max Differential Pressure per Element	18	1.2
Max Permeate Backpressure	5	0.3

Note: Soft start on boost pumps required to minimize pressure/flow shocks to elements.

Temperature	Fahrenheit	Celsius
Max. Operating	122°	50°
Max. CIP Temperature	122°	50°

pH Parameters	pH
pH Range during Operation at 25°C Max	1.0-11.0
pH Range during CIP Operation at 50°C Max	2.0-11.0

Peroxide	Max ppm.
Free Peroxide in Product During Operation	<3 ppm
Peroxide as a sanitizer at 25°C Max, pH6-7, 10minutes recirculation	0.1%

Chlorine	Norm PPM	Max PPM
Free Chlorine During Operation	0	<0.1
Chlorine During CIP at pH10.8-11.0 and 50°C	150	180

Note: Maximum chlorine exposure for all elements is 30 minutes per day at pH and temperature conditions listed above.

DIMENSIONS & WEIGHT

Element	Model No.	Diameter (B) in (cm)	Length (A) in (cm)	PWT ID/OD in (cm)	Tube Extension (C) in (cm)	Dry Weight lb (kg)
1.8"	1812TM	1.8” (4.6)	11.75” (29.8)	0.665” (1.71)	0.75” (perm) 1.00” (plug)	1.0 (.45)
2.5"	2540TM 2540HF 2540HM	2.4” (6.1) 2.4” (6.1) 2.4” (6.1)	40.0” (101.6) 40.0” (101.6) 40.0” (101.6)	0.75” (1.90) 0.625” (1.59) 0.75” (1.90)	1.00” (2.54) – 1.00” (2.54)	4.0 (1.8) 4.0 (1.8) 4.0 (1.8)
4"	4040TM 4040HM 4040HF	3.9” (9.9) 3.9” (9.9) 3.9” (9.9)	40.0” (101.6) 40.0” (101.6) 40.0” (101.6)	0.75” (1.90) 0.75” (1.90) 0.625” (1.59)	1.00” (2.54) 1.00” (2.54) –	12.0 (5.5) 12.0 (5.5) 12.0 (5.5)
8"	7940HF 8040HF	7.9” (20.1) 7.9” (20.1)	40.0” (101.6) 40.0” (101.6)	1.138” (2.89) 1.125” (2.86)	– –	35.0 (15.9) 35.0 (15.9)

Recommended Element Cross Flow Rate

Element

Feed Spacer (in miles)

1.8"

m³/hr
gpm

0.7
3

0.8
3

0.9
4

1.0
4

1.1
5

2.5"

m³/hr
gpm

1.3
6

1.5
7

1.8
8

2.0
9

2.1
9

4.0"

m³/hr
gpm

3
15

4
17

5
20

5
23

5
24

m³/hr
gpm

15
66

17
75

20
89

23
99

24
105

*Note: The recommended cross flow rate will be subject to differential pressure limitations and specific applications.

Synder_SpecificMembranes-img1

Membrane Area(SQ. FT.)

Element

Feed Spacer (in mils)

1812TM

3.1

2.7

2.1

1.6

1.3

2540M

2540F

4040M

4040F

7940F

379

335

268

210

178

8040F

379

335

268

210

178

TECHNICAL NOTES

For element sizes not listed, please call or email Synder Filtration for details. We can design an element to fit your exact needs – just specify the element outer diameter (OD) or vessel/housing inner diameter (ID), element inner diameter (ID), and length. Elements are also available with or without a controlled bypass tail. Additional feed spacers are also available. Trials should be conducted to determine optimal application conditions.